BUF company software to be shared?
-
FXDude
- Posts: 1145
- Joined: 19 Jun 2012, 19:59
Re: BUF company software to be shared?
Hum! I knew it was a question of time before a studio released what they develop & use themselves!
And I'm equally convinced it's just the begining of a trend! (considering the still staggering vacuum)
From Wiki
From the article
More than one 'high-end' choice!
And I'm equally convinced it's just the begining of a trend! (considering the still staggering vacuum)
From Wiki
That covers more of a historical aspect of developments, but sure sounds encouraging concerning potential capabilities of what they would release, if it's at all indicative.BUF is credited with pioneering in the following fields : stereo-modeling and camera mapping techniques in production; the development of motion blur post-process and camera tracking software[citation needed]; creating ‘freezing-effect’; conceiving 3D camera movements in a photorealistic environment reproduced by utilizing still photographic images[citation needed]; introducing new software that simulates clothing; producing invisible continuous shots between live action and full CG; advancing singular character animation software; introducing crowd generation and management techniques along with new fluids and solid dynamics systems; creating original tools dedicated to animation and paint3D and launching the ‘bullet time’ effect created for “The “Matrix” franchise, which was directly inspired by the research carried out by BUF while working on Michel Gondry's "Like A Rolling Stone"[1] music video in 1996.[2]
From the article
Microsoft may be far from the only one they may be challenging! Hopefully (but with fairly good chances considering where it's coming from (born in production)) to perhaps eventually say "finally"!We are more in the vein of Linux rather than Microsoft. We are the challenger, and we are open and we are free.
More than one 'high-end' choice!
-
Hirazi Blue
- Administrator
- Posts: 5113
- Joined: 04 Jun 2009, 10:15
Re: BUF company software to be shared?
I wonder what kind of software they will actually release, what it will cost and who will distribute it (the Foundry, possibly? ).

Stay safe, sane & healthy!
-
Bullit
- Moderator
- Posts: 2621
- Joined: 24 May 2012, 07:44
Re: BUF company software to be shared?
A member in CGsociety posted this:
For me what attracted was this part in article:
http://forums.cgsociety.org/showthread. ... &t=1225924If it is not an hoax this is a great news
- the Bprod the BUF process manager is just a killing tools
- the photogrametry tools are very practical
- Bview the image player is just great
- Bcolor the compositing package is also excellent
that's a great move from BUF ... especially if Bprod is available.
For me what attracted was this part in article:
The methodology within the BUF studio differs from many other workflows in that there are no specialists – no separation into effects modelers, animators, background artists, compositors, etc. When a BUF artist is given a shot to work on, the artist works on the entire shot, from concept to final. All elements of the BUF software suite are therefore designed to be integrated and used by a single artist.
-
FXDude
- Posts: 1145
- Joined: 19 Jun 2012, 19:59
Re: BUF company software to be shared?
Yes Bullit I was about to point to that bit too! :]
Meaning that it's entirety seems to be very digestable by one person (with a seemingly equal workgroup side to it), which says alot about it's overall 'friendliness'.
And there is also this bit ..
Also it seems that this article (which at least does gives a rough release timeframe) wasn't the initial announcement,
The following is from http://variety.com/2014/film/features/b ... 201136803/ which, almost like in a stroke of cosmic balance, quite ironically dates back from around Softs (*shameless*) termination announcement.
http://variety.com/2009/digital/news/bu ... 118010659/
And seems to be night and day in terms or reason of being/philosophy compared to certain industry standards that needn't be named, owned and operated by brokers and lawyers seeing people as mere cash cows to be squeezed as much as they can bear using every trick in the book (and coming up with always new and 'creative/innovative' ways to do it even 'better')
So who knows! but.. for me it's enough to give me (quite refreshing) chills up my back
Meaning that it's entirety seems to be very digestable by one person (with a seemingly equal workgroup side to it), which says alot about it's overall 'friendliness'.
And there is also this bit ..
And this bit!Many other visual effects tools – though they may have been developed with extensive user input and feedback – still suffer from being created by software designers, not visual effects artists.
One trait of a good software engineer is being able to effectively interpret and incorporate user requirements,
but Pierre Buffin’s suite of software and workflows will have the advantage of being designed by VFX artists for VFX artists.
“We think our software collection is valuable for two reasons:
first, we have a proven track record, and second we have a consistent collection of software.
Most products only offer special solutions for a studio.
So they spend a lot of time and money to patch the different software together to make them work as a whole. [now doesn't that ring a bell?]
It’s a pain in the ass. They don’t manage to make it really efficient and seamless.
Ours is a complete package, a complete pipeline. And the artists really like it.”
All of which makes my head buzz with intrigue as a user oriented solution made by artists for artists (ringing yet another bell? :] )You can stay on the surface with it or go deeper and develop your own things.’
Also it seems that this article (which at least does gives a rough release timeframe) wasn't the initial announcement,
The following is from http://variety.com/2014/film/features/b ... 201136803/ which, almost like in a stroke of cosmic balance, quite ironically dates back from around Softs (*shameless*) termination announcement.
That, and it's also still owned and operated by a guy and a dozen developers who are clearly passionate about what they do. (imagine if Daniel Langlois never sold out)To open up a new revenue stream, Buf is prepping the commercial launch of its proprietary vfx software, to be packaged at an attractive price for young filmmakers and universities, with a special focus on emerging countries.
http://variety.com/2009/digital/news/bu ... 118010659/
And seems to be night and day in terms or reason of being/philosophy compared to certain industry standards that needn't be named, owned and operated by brokers and lawyers seeing people as mere cash cows to be squeezed as much as they can bear using every trick in the book (and coming up with always new and 'creative/innovative' ways to do it even 'better')
So who knows! but.. for me it's enough to give me (quite refreshing) chills up my back
-
Tekano
- Posts: 488
- Joined: 09 Jun 2009, 12:49
- Location: London, UK
Re: BUF company software to be shared?
aint changing from SI until something better comes along... could this be better? 
Gossip is what no one claims to like, but everybody enjoys.
-
Hirazi Blue
- Administrator
- Posts: 5113
- Joined: 04 Jun 2009, 10:15
Re: BUF company software to be shared?
Although I am not saying I as an already starved artist should be able to afford this (which I already know I won’t), I caution you all to reserve judgment on this product/these products until the producer has officially announced a general price range for it.
PS Waiting to see what it can actually do might be helpful also, obviously...
PS Waiting to see what it can actually do might be helpful also, obviously...
Stay safe, sane & healthy!
-
MauricioPC
- Moderator
- Posts: 1089
- Joined: 16 Sep 2013, 11:39
Re: BUF company software to be shared?
Apparently, this was done with the BUF inhouse software. Quite impressive.