Vray for Softimage official release
-
- Posts: 174
- Joined: 10 Jul 2009, 21:58
Re: Vray for Softimage official release
Do they sell rendernodes for Softimage, I don't see that anywhere?
Phil Harbath
Jamination Productions
Jamination Productions
-
- Posts: 440
- Joined: 06 Jun 2009, 14:01
- Contact:
Re: Vray for Softimage official release
Wow, if that is true I reall have nothing to prevent me from buying anymore.Hirazi Blue wrote:I'm not sure if this will help anything, but in
this Mailing List post Vlado claims the following:I'm not exactly sure what he means by that, but this seems to imply that you could keep on using your Vray for Maya batch licenses. Or am I reading this wrong?Vladimir Koylazov wrote:And you can still share batch/standalone rendering licenses between V-Ray for Maya and V-Ray for Softimage.
Achim
I'm now part of an endangered species...
Re: Vray for Softimage official release
Yes, well it depends if new users are strictly looking for a render solution (V ray) and what 3d application is more affordable in that combo situationLord Futzi Voldemort wrote: But what also hasn´t changed is: If you have to decide between maya and SI as a new user, maya will look still more attractive, because if you want to use vray you´ll get 10 licenses for just 100 bucks more than the si version. So this doesn´t help growing the si userbase (and getting a higher return of investment on CGs side) at all.
Achim
or if they are looking at software capabilities and what you want to do (ICE, face robot, quickExtrude, whatever).
If you do not own anything Maya + V ray would be cheaper solution , for the same amount of V ray batch licenses.
If you already own SI, it's cheaper to purchase 2 Vray licences, than Maya and one V ray licence.
You already got V ray for Maya, and apparently you can borrow batch licences for SI.
It's not so bad after all.
-
- Posts: 440
- Joined: 06 Jun 2009, 14:01
- Contact:
Re: Vray for Softimage official release
For me it isn´t bad at all anyway. I was mainly refering to your assumption:Memag wrote: You already got V ray for Maya, and apparently you can borrow batch licences for SI.
It's not so bad after all.
It seems illogical to me offer less only because the userbase is small. But lets just wait and see. I may be wrong.Memag wrote: "Softimage has significantly smaller user base, so they need to balance the income/purchased licences."
Only from the bussiness point of view it doesn´t make much sense to me.
Achim
I'm now part of an endangered species...
Re: Vray for Softimage official release
hello my frinds.vray is very faster than mr and arnold.i test it .i render 300000hair with GI in vray and render time just 1min50sec
but in arnols render time is 3min10sec with aasumples=3 and defulit sumples is=3 adn very bad quality.
after this .i chang AAsumples from 3 to 10 and render time in arnold is 27min.and even with this quality in arnold my vray result in 1m50sec very beter than arnold.arnold have nouise point and you must have uper aa sumples. vray is faster render than 3delight and mr and arnold and max well.i tested all of this render.
we have 3 mode lighting witch mixsing to ghader in vray and we have very easy to setup lighing. vray is incridable.this is many vfx short film with vray
http://vimeo.com/12125147
http://vimeo.com/33030265
Newcomer (<20 posts) alert: please use the URL tags - HB
but in arnols render time is 3min10sec with aasumples=3 and defulit sumples is=3 adn very bad quality.
after this .i chang AAsumples from 3 to 10 and render time in arnold is 27min.and even with this quality in arnold my vray result in 1m50sec very beter than arnold.arnold have nouise point and you must have uper aa sumples. vray is faster render than 3delight and mr and arnold and max well.i tested all of this render.
we have 3 mode lighting witch mixsing to ghader in vray and we have very easy to setup lighing. vray is incridable.this is many vfx short film with vray
http://vimeo.com/12125147
http://vimeo.com/33030265
Newcomer (<20 posts) alert: please use the URL tags - HB
- bottleofram
- Posts: 355
- Joined: 17 Aug 2010, 11:21
Re: Vray for Softimage official release
Both of those were rendered using vray4max, right? Not that i think it doesnt help make your point, but right now, the benchmarks worth looking into are the ones that put vray4soft to the test.... Even though the results shouldn't differ too much.nourvfx wrote:hello my frinds.vray is very faster than mr and arnold.i test it .i render 300000hair with GI in vray and render time just 1min50sec
but in arnols render time is 3min10sec with aasumples=3 and defulit sumples is=3 adn very bad quality.
after this .i chang AAsumples from 3 to 10 and render time in arnold is 27min.and even with this quality in arnold my vray result in 1m50sec very beter than arnold.arnold have nouise point and you must have uper aa sumples. vray is faster render than 3delight and mr and arnold and max well.i tested all of this render.
we have 3 mode lighting witch mixsing to ghader in vray and we have very easy to setup lighing. vray is incridable.this is many vfx short film with vray
http://vimeo.com/12125147
http://vimeo.com/33030265
Newcomer (<20 posts) alert: please use the URL tags - HB
Cheers
Re: Vray for Softimage official release
—( Arnold has Noise points™ you say?)
Re: Vray for Softimage official release
You are being very simplistic in the way you compare your renderers. (And you should also post some images to back it up)nourvfx wrote:hello my frinds.vray is very faster than mr and arnold.i test it .i render 300000hair with GI in vray and render time just 1min50sec
but in arnols render time is 3min10sec with aasumples=3 and defulit sumples is=3 adn very bad quality.
after this .i chang AAsumples from 3 to 10 and render time in arnold is 27min.and even with this quality in arnold my vray result in 1m50sec very beter than arnold.arnold have nouise point and you must have uper aa sumples. vray is faster render than 3delight and mr and arnold and max well.i tested all of this render.
Arnold uses FIXED sampling and Vray uses Adaptive sampling (as default).
Arnold ALWAYS BruteForces GI which garantees your renders wont flick. Plus it has a bunch of hair optimizations you can use to reduce render times without loosing quality.
Also it is very difficult to compare renderers unless you are using exactly the same setup (geometry, shading models, light intensity, etc, etc, etc...). Like so: viewtopic.php?p=13737#p13737
Have in mind that even this kind of comparison will not reflect real production results, since textures make a big difference in Adaptive Samplers (because of the increased contrast, making them slow), and little difference in Fixed Samplers...
Gustavo Eggert Boehs
Blog: http://www.gustavoeb.com.br/
Blog: http://www.gustavoeb.com.br/
- Hirazi Blue
- Administrator
- Posts: 5107
- Joined: 04 Jun 2009, 12:15
Re: Vray for Softimage official release
I think it's best if we're all willing to accept that nourvfx offers an opinion on using VRay from his own perspective here, not a full-fledged, exhaustive, 100% accurate benchmark comparison of all the renderers at hand...
;)
;)
Stay safe, sane & healthy!
Re: Vray for Softimage official release
We can also conclude that he likes hairy stuff.
Re: Vray for Softimage official release
A couple of questions.
How fast is Vray in scanline mode?
Can you do the Vray gizmo stuff to limit raytracing to only what you need? (see url)
http://www.spot3d.com/vray/help/150SP1/tutorials_anim.htm
Does it support long hair -> Kristinka hair -> ?
How fast is it with particles?
Those for are for me the important question determining whether I could use vray for rendering animation.
I do like te Ptex stuff you guys implementing in Vray. 3D Coat has Ptex.
How fast is Vray in scanline mode?
Can you do the Vray gizmo stuff to limit raytracing to only what you need? (see url)
http://www.spot3d.com/vray/help/150SP1/tutorials_anim.htm
Does it support long hair -> Kristinka hair -> ?
How fast is it with particles?
Those for are for me the important question determining whether I could use vray for rendering animation.
I do like te Ptex stuff you guys implementing in Vray. 3D Coat has Ptex.
Re: Vray for Softimage official release
vray has no scanline mode, its raytracing only.
for the gi animation thing, break your scene in passes and render the elements seperatly. should be easy with xsi's passes and partitions system.
for the gi animation thing, break your scene in passes and render the elements seperatly. should be easy with xsi's passes and partitions system.
Re: Vray for Softimage official release
hy
i test with my labtop HP4520.core i5 and 3 gib ram and atigraphic with2263mb garaphic ram
this is Enough for this test.yes???
300000hair with GI
this test with arnold with aasamples 3 and defultsamles is 3
rendertime is 3min10sec
i test with my labtop HP4520.core i5 and 3 gib ram and atigraphic with2263mb garaphic ram
this is Enough for this test.yes???
300000hair with GI
this test with arnold with aasamples 3 and defultsamles is 3
rendertime is 3min10sec
- Attachments
-
- arnold_3m10sec.jpg (179.7 KiB) Viewed 2144 times
Re: Vray for Softimage official release
What version of Arnold are you using?
Re: Vray for Softimage official release
and this is rendered with vray with DMC samples min1 max4 and GI is on in primarymode is iraadiancemap in high mode and secoundary mode is lightcash with 500sabdivs
render time:1min50sec wihch is faster and beter quality?????????tiy say maybe i have mistak is my render setup or my arnold is bad plugin if you have beter info please share with me thanks my frinds
render time:1min50sec wihch is faster and beter quality?????????tiy say maybe i have mistak is my render setup or my arnold is bad plugin if you have beter info please share with me thanks my frinds
- Attachments
-
- vray_1.jpg (155.66 KiB) Viewed 2137 times
Who is online
Users browsing this forum: No registered users and 55 guests