Community ICE Project - Modeling Tools
Community ICE Project - Modeling Tools
I've decided to branch the Community ICE Project modeling information out of the general project thread and into a more specific thread for those that wish to contribute. Below is the short list of suggestions provided by the community in that thread. As more ideas surface, we can update this post.
Easy (from highly to less relevant)
- Extrusion along curve (fast and simple) Jump to thread
- Symmetry Jump to latest update
- Merge vertices (based on threshold)
- Revolution
- Loft
- Shell (ICE version already exists in SAP so is less relevant)
Intermediate (from highly to less relevant)
- Extended primitives
- Clone island (clones one or more islands of an input mesh, with option to delete the originals)
- Extrusion along curve (complex)
- Relax/smooth tool (with shape preservation?)
- Cap Holes (ICE version already exists in SAP so is less relevant)
Advanced (from highly to less relevant)
- Better boolean tools (with actually good results
- De-intersect (should fix intersecting groups of polygons: think of fixing the result of a cloth simulation ran without self-collisions. this looks more like a deformer for me, but is great!)
- Retopology (based on curves?)
- Bridge Tool (Modo alike, able to twist and find nice solutions to bridge different number of edges)
I recommend if you decide to work on one of these tools, you post it here and make routine announcements on your progress (or lack thereof). That way others can "jump in" as the opportunities arise.
Easy (from highly to less relevant)
- Extrusion along curve (fast and simple) Jump to thread
- Symmetry Jump to latest update
- Merge vertices (based on threshold)
- Revolution
- Loft
- Shell (ICE version already exists in SAP so is less relevant)
Intermediate (from highly to less relevant)
- Extended primitives
- Clone island (clones one or more islands of an input mesh, with option to delete the originals)
- Extrusion along curve (complex)
- Relax/smooth tool (with shape preservation?)
- Cap Holes (ICE version already exists in SAP so is less relevant)
Advanced (from highly to less relevant)
- Better boolean tools (with actually good results
- De-intersect (should fix intersecting groups of polygons: think of fixing the result of a cloth simulation ran without self-collisions. this looks more like a deformer for me, but is great!)
- Retopology (based on curves?)
- Bridge Tool (Modo alike, able to twist and find nice solutions to bridge different number of edges)
I recommend if you decide to work on one of these tools, you post it here and make routine announcements on your progress (or lack thereof). That way others can "jump in" as the opportunities arise.
Last edited by Inisheer on 25 Jan 2012, 03:37, edited 4 times in total.
- Daniel Brassard
- Posts: 878
- Joined: 18 Mar 2010, 23:38
- Location: St. Thomas, Ontario
- Contact:
Re: Community ICE Project - Modeling Tools
Hi Inisheer,
Extended primitives:
As part of the ICE Topology tutorial that I am currently working on, I have already made various primitives, so count me in on this one.
Extended primitives:
As part of the ICE Topology tutorial that I am currently working on, I have already made various primitives, so count me in on this one.
$ifndef "Softimage"
set "Softimage" "true"
$endif
set "Softimage" "true"
$endif
Re: Community ICE Project - Modeling Tools
Great, thanks for the input. I am currently working on Symmetry. I have run in to a few problems and will update this post with details once I return home.Daniel Brassard wrote:Hi Inisheer,
Extended primitives:
As part of the ICE Topology tutorial that I am currently working on, I have already made various primitives, so count me in on this one.
Re: Community ICE Project - Modeling Tools
I have created a proof of concept of sorts for a quick symmetry compound. There are still quite a few things to work out as it is simple at this point. However, I think it's a good start.
If there is a better performance / logical way of doing this, please post your thoughts and I (or others) can edit the compound.
Attachment is obsolete. See follow-on posts.
If there is a better performance / logical way of doing this, please post your thoughts and I (or others) can edit the compound.
Attachment is obsolete. See follow-on posts.
- Attachments
-
- Create Symmetry.xsicompound
- (9.42 KiB) Downloaded 253 times
Last edited by Inisheer on 25 Jan 2012, 13:30, edited 2 times in total.
Re: Community ICE Project - Modeling Tools
Very nice!
Re: Community ICE Project - Modeling Tools
Don't forget about the transformation matrix of the object ;)
- Attachments
-
- Create Symmetry.xsicompound
- (10.12 KiB) Downloaded 269 times
- AlexanderM
- Posts: 28
- Joined: 10 Jun 2009, 17:13
- Contact:
Re: Community ICE Project - Modeling Tools
I would like to have a Symmetry deformer tool such as a Smart ReSym in ZBrush. Tool must analyze the topology, not thresholds
-
- Posts: 143
- Joined: 09 Jun 2009, 12:12
- Location: Czech Republic
- Contact:
Re: Community ICE Project - Modeling Tools
well, i added option to keep original mesh and weld points - (weld points compound made by Christian Gotzinger see here: http://vimeo.com/31921308)
- Attachments
-
- Create Symmetry.xsicompound
- (72.87 KiB) Downloaded 262 times
Re: Community ICE Project - Modeling Tools
Great contributions all! Glad to see some movement from the community.
Re: Community ICE Project - Modeling Tools
Slightly updated the compound with a few comments and version number (1.1). I believe the next step should be to create a custom PPG for the symmetry axis. Any thoughts?
Mods: Please let me know if you wish to take the si-community name out of any posted videos.
Mods: Please let me know if you wish to take the si-community name out of any posted videos.
- Attachments
-
- Sym01.JPG (98.36 KiB) Viewed 9641 times
-
- compound_01.JPG (165.74 KiB) Viewed 9719 times
-
- Create Symmetry.1.1.xsicompound
- (73.58 KiB) Downloaded 321 times
- Hirazi Blue
- Administrator
- Posts: 5107
- Joined: 04 Jun 2009, 12:15
Re: Community ICE Project - Modeling Tools
So far, I see no problem with it... (Free advertisement!!! ). Nice work, BTW...Inisheer wrote:Mods: Please let me know if you wish to take the si-community name out of any posted videos.
Stay safe, sane & healthy!
Re: Community ICE Project - Modeling Tools
I just want to say that the (idea of) an ICE symmetry compound is BRILLIANT!
Suggestion/idea: make it not only mirror on 1 axis but add option for radial multiply? Useful for modeling wheelhubs, cogs, gears, clocks, octopuses (octopi?) or any other lifeform with a radial baseplan.
Suggestion/idea: make it not only mirror on 1 axis but add option for radial multiply? Useful for modeling wheelhubs, cogs, gears, clocks, octopuses (octopi?) or any other lifeform with a radial baseplan.
Re: Community ICE Project - Modeling Tools
great idea... looks very usefull in zbrush where such a feature is available and you can see people creating complex models in no time with that...
Gustavo Eggert Boehs
Blog: http://www.gustavoeb.com.br/
Blog: http://www.gustavoeb.com.br/
Re: Community ICE Project - Modeling Tools
Hmm. That's pretty interesting. I don't have any experience with the tool, but I'll see if I can work something out.
Been a bit busy lately with my 10 mo old son and graduate school (and work). Hopefully I will be able to work on it this weekend.
Been a bit busy lately with my 10 mo old son and graduate school (and work). Hopefully I will be able to work on it this weekend.
Who is online
Users browsing this forum: No registered users and 19 guests